The Hamel Spinning Disc Experiment V1.0

3 March 97 - Jean-Louis Naudin

I have built the first test model of Hamel spinner disc, I use 10 ferrite magnets 25x5x40 mm magnetic poles inward mounted in 10 cm PVC cylinder. For the spinning device, I use the Levitron on glass sheet ( it it a very frictionless 28 mm ring magnet mounted as a spinning top ). The "magnetic gate" is 50 mm above the glass sheet with a FIXED appartus.

The Levitron device is spinning for about 6 mn aligned on magnetic gate axis under the "magnetic gate".

( For more informations about "magnetic gate" see at : John Bedini's Magnetic Gate )

If you need more informations or if you have any suggestions send me your Feedback
Email : [email protected]

  Return to Hamel Technologies home page